If you know me, you know that my woodshop is my pride and joy. A little building dedicated to woodworking has been a dream of mine as long as I have been making sawdust.
This has been a working shop since before the Sábado house was finished, and in fact even before the shop had a roof, because I needed to get the kitchen cabinets built while the contractors were still here to install the plumbing.
 |
| Work was going on in here with only a tarp to keep out the rain. |
 |
| Kitchen and bathroom cabinets came first. |
Other than my big old workbench, everything in the shop was temporary, thrown together in a hurry so I could get to work. There was no insulation or sheetrock, and initially even the doors were pieces of plywood.
 |
| Imagine working in this mess! |
Well now most of the house furniture is done. I have posted previously about the colonnade, the Craftsman bookcase, the hall tree, etc. and it's time to give a little love to the woodshop.
As always, the project started with drawings done in Adobe Illustrator.
 |
| North Wall (Same wall as above photo) |
  |
| South Wall |
 |
| West Wall |
Old buddy Bruce came down from Washington to help with Phases 1 and 2, which were to set up a temporary shelter to store stuff so we'd have room to work, and then to insulate and sheetrock three of the walls. The fourth wall will have to wait until I finish making the first batch of shop furniture.
 |
Temporary home for a lot of crap, much of which will
probably end up getting thrown out.
|
 |
| Some texture and paint, and it's time to get started building things. |
 |
| There goes this month's Social Security check! |
First order of business is an extension for the table saw. This piece does triple duty, since it also hides the saw's dust collector, and serves as a router table for two, count 'em two routers.
Next came the cutoff saw bench, which is also my primary toolbox.
I finished this piece and the table saw extension in teak oil with no stain, but everything else will get stained, making this bench kind of the 'accent.'
The goal is to get everything possible in a drawer or behind a door because of sawdust. This cabinet alone has 18 drawers plus two pull-out 'breadboards' to support long boards.
 |
| By the time I finish, I will have made 40 drawers. |
There's no way an old guy like me is gonna remember what's in 40 drawers, so I made some home-made pulls with label holders on them.
The next project was a seven-foot workbench with more doors and drawers. This will be a tinkering bench, where I can work on small things, even non-wood stuff. The doors hide a shop vacuum and a paint sprayer blower. Both of these have 20-foot hoses that I can haul out as needed, then just stuff back into the hole in the cabinet.
 |
The black spot is the vacuum hose, and to the left is the blower hose. Switches for both are in the middle.
|
Today, I just finished the first of two tall cabinets. This one is for storing lumber, and the top is hinged in case I want to store boards that are too tall.
That's were we stand as of late September, 2019. It's a slow process, but what's time to a retired guy?
Stay tuned!
